Whats included in window replacement job ?

1. Assessment & Preparation

Before any work begins, the contractor will:

• Inspect your existing windows to check for damage or structural issues.

• Measure everything precisely to ensure the new windows fit perfectly.

• Help you choose the right window type (vinyl, wood, fiberglass, etc.) and style (double-hung, casement, bay, etc.).

2. Removing the Old Windows

Next, they’ll carefully take out the old windows by:

• Removing trim, caulking, and fasteners.

• Checking for any damage around the window frame.

• Cleaning the area and preparing it for the new installation.

3. Installing the New Windows

Now it’s time to put the new windows in place:

• Positioning and securing the window for a tight, level fit.

• Adding insulation and sealing around the edges to prevent drafts.

• Installing trim and finishing touches to make it look seamless.

4. Final Touches & Cleanup

Once the windows are in, the crew will:

• Test each window to make sure it opens, closes, and locks properly.

• Clean up any leftover debris and materials.

• Go over maintenance tips and warranty info with you.

Extras & Upgrades

Some homeowners also choose to add:

• Energy-efficient glass coatings (to reduce heat loss and UV exposure).

• Custom trim or painting to match their home’s style.

• Window screens or smart locks for added security.

What impacts the price to replace a window ?

The cost of replacing windows can vary a lot depending on several factors. Here’s what impacts the final price:

1. Window Type & Material

The type of window you choose plays a big role in pricing:

✅ Vinyl Windows (Most Affordable) – $300 to $800 per window

✅ Wood Windows (More Expensive, Classic Look) – $800 to $1,500 per window

✅ Fiberglass Windows (Durable & Energy-Efficient) – $600 to $1,500 per window

✅ Aluminum Windows (Strong but Less Insulated) – $400 to $1,200 per window

Custom shapes like bay or bow windows are pricier than standard double-hung or casement windows.

2. Window Size & Style

Bigger windows cost more due to extra materials and labor.

• Small windows (bathrooms, basements) → Lower cost

• Large or specialty windows (floor-to-ceiling, custom shapes) → Higher cost

Different styles also impact price:

✅ Single-Hung – Cheaper, one moving sash

✅ Double-Hung – More expensive, two moving sashes

✅ Casement Windows – More expensive due to crank mechanisms

✅ Bay/Bow Windows – High-end, $2,000+ each

3. Number of Windows

Most contractors offer discounts for multiple windows. Replacing one window can cost more per unit than replacing ten or more at once.

4. Installation Complexity

Some jobs take longer or require extra work, increasing labor costs:

✅ Easy Install → Replacing a window of the same size in a standard wall = lower labor costs

❌ More Expensive Installs:

• Expanding or modifying window openings

• Replacing damaged frames or rotting wood

• Installing windows in high or hard-to-reach areas

5. Glass Type & Efficiency

Upgraded glass improves energy efficiency but raises the cost:

✅ Standard Double-Pane Glass – Basic option

✅ Triple-Pane Glass – Adds insulation ($100–$300 more per window)

✅ Low-E Coating – Reflects heat, saves energy ($50–$100 more per window)

✅ Gas-Filled (Argon/Krypton) – Increases efficiency, adds $50–$200 per window

6. Labor & Location

✅ Licensed, experienced contractors charge more but do better work.

✅ Urban areas tend to have higher labor costs than rural areas.

✅ Seasonal demand – Prices might be higher in peak seasons (spring & summer).

7. Additional Costs

🔹 Removing old windows – $50 to $150 per window

🔹 Permits (if required) – $50 to $300 depending on location

🔹 Custom colors, trims, or designs – Adds to the price

Estimated Price Ranges

• Basic Vinyl Window Replacement → $300 – $700 each

• Mid-Range Energy-Efficient Window → $600 – $1,200 each

• High-End Custom Wood Window → $1,500+ each

• Full House Replacement (10–15 Windows) → $5,000 – $20,000+

Doors

1. Pre-Installation & Prep Work

✅ Assessment & Measurements – The contractor measures the door frame to ensure the new door fits perfectly.

✅ Material Selection – Choose the door type (wood, fiberglass, steel, etc.), style (solid, glass panel, decorative), and hardware.

✅ Permit Handling (if required) – Some exterior door replacements may require a permit.

✅ Worksite Prep – Protecting floors, moving furniture, and setting up tools.

2. Removal of the Old Door

✅ Careful Removal – The old door, frame (if necessary), hinges, and trim are carefully removed.

✅ Frame & Structure Inspection – Checking for rot, damage, or misalignment in the door opening.

✅ Repairs (if needed) – Fixing any damaged framing or addressing uneven floors/walls.

3. Installing the New Door

✅ Placing & Securing the New Door – Ensuring a proper fit, leveling, and securing the door.

✅ Installing the Frame & Trim – If replacing the full frame, it will be secured and adjusted for a perfect fit.

✅ Adding Weatherproofing & Insulation – Sealing gaps with foam insulation and weather stripping to prevent drafts.

✅ Installing Hinges, Locks & Hardware – Handles, deadbolts, smart locks, peepholes, or other accessories are added.

4. Finishing Touches

✅ Interior & Exterior Trim Installation – Adding or reinstalling decorative molding for a polished look.

✅ Painting or Staining (if needed) – If the door isn’t pre-finished, painting or staining may be required.

✅ Cleanup & Waste Removal – Old door, debris, and materials are removed from the site.

✅ Final Inspection & Testing – Ensuring the door opens, closes, and locks properly, and that weather seals are secure.

Optional Add-Ons

🔹 Upgraded Locks (Smart Locks, Keyless Entry, Reinforced Deadbolts)

🔹 Custom Trim or Decorative Molding

🔹 Glass Inserts or Side Panels

🔹 Energy-Efficient or Soundproofing Upgrades